Jeanneau Sun Fast 30 OD   The Jeanneau Sun Fast 30 OD is the result of a partnership between VPLP Design, Multiplast, and Chantiers Jeanneau in response to a design brief from the UNCL-Racing Division from the Yacht Club de France (France), the Royal Ocean Racing Club (UK), and the Storm Trysail Club (USA). The Sun Fast 30 OD was selected for use by World Sailing for the 2024 Double Handed World Offshore Championships, and again for the 2026 edition in Cowes, UK. This exciting One Design will introduce a new generation to offshore yacht racing. It employs an innovative recyclable Elium resin system by Arkema in its production. This particular boat is our demonstrator, which is equipped with B&G electronics and North Sails (available by separate negotiation).   PRICE OF £104,125 EX VAT FOR EXPORT or €119,250 Euros. INC VAT PRICE FOR the UK IS £124,950   Technical Specification Overall Length: 10,40 m | 34’1’’Hull Length: 8,99 m | 29’5’’Water Length: 8,40 m | 27’6’’Displacement: 2,700 kg | 5,952 lbsBeam Max: 2,99 m | 9’9’’Draft: 2,00 m | 6’6’’ Berths: 2 + 2 (option)Sail Drive: NANNI 10hp – 10 HPCE Category: A4 / B5 / C6Architect: VPLP Design   Electronics B&G H5000 HYDRA AUTOPILOT – Triton Edge processor, T1 12v ram B&G H5000 GRAPHIC DISPLAY B&G H5000 PILOT CONTROL PAD B&G PILOT REMOTE CONTROL B&G PRECISION 9 COMPASS B&G ZG100 HF GPS SENSOR B&G WS710 WIND VANE SENSOR + 70cm CARBON WAND B&G VHF with DSC + COMAR AG100 GPS ANTENNA AIS TRANSCEIVER MULTIFONCTION B&G DISPLAY ZEUS S 9 BAROMETER H5000   Mast and Rigging   RIG• Carbon swept back single spreaders• Carbon 9/10th fractional mast• Dyform stainless steel wire forestay• Dyform stainless steel shrouds• Windex at masthead• Twin backstays• Carbon “rectangular” profile boom• “Boomkicker” rigid boom vang• Retractable carbon bowsprit   RUNNING / RIGGING:• 1 Mainsail halyard• 1 masthead spinnaker halyard• 1 fractional spinnaker halyard• 1 jib / storm-jib halyard• 2 Jib sheets• 2 Spinnaker sheets with barber adjustment• 1 Spinnaker tack-line• 1 Mainsail edge tackle• 2 Mainsail reefsinsheet traveler• 3D adjustable jib trim• 1 Cunningham   Construction   HullHull made in monolithic infused with Elium resin + reinforced areas hull counter-mould made in fiberglass and Elium resinFiberglass infused with Elium resin / PET foam main bulkheadsFiberglass infused with Elium resin / PET foam secondary bulkheadsFiberglass infused with Elium resin / PET foam secondary structural partsThe bulkheads are glued in the hull and on the hull counter-mould part   DeckFiberglass infused with Elium resin / PET Foam + reinforced areas   KeelMixed cast iron keel with lead bulb   RuddersInfusion monolithic fiberglass / Uni carbon reinforcement   Disclaimer The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice. It is not guaranteed that the safety gear listed on the specification comes within the manufacturer’s safety guidelines i.e. expiry dates and servicing and is therefore sold as is.